Yoke Swivel Hoist Ring - type 231 metric thread

- Rotates through 360° and pivots 180°, and simultaneously allows lifting from any direction.

- Manufactured from forged alloy steel, quenched and tempered and tested in accordance with IS EN1677-1.

- Load rated parts are 100% magnaflux crack detected.

- Individual forged parts and cap screw are traceable to Test Certification.

- Bolts are Metric thread 10.9.

- Proof tested to 2.5 times the WLL and Fatigue rated to 1.5 times the WLL.

- Design Factor 4 : 1.

- All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.

- Quick and simple assembly, just a tapped hole is required.

Specification

Product	WLL 4:1	Thread	A	B	C	D	E	F	G	H	R	S	SW	Torque	Mass
Code	tonnes	M	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	in Nm	kg
8-231-005	0.5	M8 x 1.25	33	42	28	11	12	80	58	23	17	6	13	30	0.3
8-231-007	0.7	M10x 1.50	33	41	29	11	15	80	58	23	17	6	17	60	0.3
8-231-010	1.0	M12 x 1.75	33	40	31	11	20	80	58	23	17	8	19	100	0.3
8-231-015	1.5	M14 x 2.0	50	56	45	17	21	117	90	36	27	10	22	120	0.9
8-231-020	2.0	M16 x 2.0	50	54	46	17	24	117	90	36	27	10	24	150	0.9
8-231-025	2.5	M18 x 2.5	65	78	57	20	26	153	108	44	34	12	30	200	1.9
8-231-030	3.0	M20 x 2.5	50	52	49	17	30	117	90	36	27	12	30	250	1.0
8-231-050	5.0	M24 x 3.0	72	81	59	25	36	163	125	44	37	14	36	400	2.6
8-231-078	7.8	M30 x 3.5	87	94	81	30	48	204	148	62	46	17	46	500	5.0
8-231-125	12.5	M36 x 4.0	110	112	98	36	54	247	188	75	57	22	55	1000	9.6
8-231-156	15.6	M42 x 4.5	110	101	108	36	63	247	188	83	57	24	65	1500	10.9
8-231-200	20.0	M48 x 5.0	110	97	113	36	72	248	188	83	57	27	75	2000	11.6
8-231-220	22.0	M56 x 5.5	123	116	121	36	84	274	202	91	64	27	85	2100	15.0
8-231-225	22.5	M64 x 6.0	123	111	126	36	100	274	202	91	64	32	95	2200	16.3

Swipe horizontally on Specs Table to view all information.

Uses

Swivel Hoist Ring uses can be as follows:

- New generation swivel hoist ring.

- Mold and die handling.

- Pump and valve handling.

- Lower profile and higher weight.

- Suited for lifting objects with no obvious attachment points.

SWIVEL HOIST RING TYPE 231 WORKING LOAD APPLICATION FACTORS

Product Code	Thread	WLL tonnes
Number of legs		1	2	1	2	2		2	3-4		3-4
Load Direction		0°	0°	90°	90°	0-45°	45-60°	unsymm.	0-45°	45-60°	unsymm.
8-231-005	M8	0.8	1.6	0.5	1.0	0.7	0.5	0.5	1.10	0.80	0.5
8-231-007	M10	1.2	2.4	0.7	1.4	1.0	0.7	0.7	1.50	1.10	0.7
8-231-010	M12	2.0	4.0	1.0	2.0	1.4	1.0	1.0	2.10	1.50	1.0
8-231-015	M14	2.4	4.8	1.5	3.0	2.1	1.5	1.5	3.20	2.30	1.5
8-231-020	M16	3.2	6.4	2.0	4.0	2.8	2.0	2.0	4.20	3.00	2.0
8-231-025	M18	5.0	10.0	2.5	5.0	3.5	2.5	2.5	5.30	3.80	2.5
8-231-030	M20	4.5	9.0	3.0	6.0	4.2	3.0	3.0	6.30	4.50	3.0
8-231-050	M24	9.0	18.0	5.0	10.0	7.0	5.0	5.0	10.50	7.50	5.0
8-231-078	M30	12.0	24.0	7.8	15.6	10.9	7.8	7.8	16.40	11.70	7.8
8-231-125	M36	14.0	28.0	12.5	25.0	17.5	12.5	12.5	26.30	18.80	12.5
8-231-156	M42	16.0	32.0	15.6	31.2	21.8	15.6	15.6	32.80	23.40	15.6
8-231-200	M48	20.0	40.0	20.0	40.0	28.0	20.0	20.0	42.00	30.00	20.0
8-231-220	M56	22.0	44.0	22.0	44.0	30.8	22.0	22.0	46.20	33.00	22.0
8-231-225	M64	22.5	45.0	22.5	45.0	31.5	22.5	22.5	47.25	33.75	22.5

Swipe horizontally on Specs Table to view all information.