LIFTING EQUIPMENT, TESTING
& SAFETY SINCE 1960


WH CP-C4 Chain Hoist

image

The William Hackett CP-C4 corrosion protected chain hoist meets and exceeds the requirements of the following international standards:

Irish Standard IS EN13157:2004 + AI:2009

The William Hackett CP-C4 chain hoist is manufactured in accordance with IS EN13157 which requires that it can be used within an operating temperature range of -40°C to +55°C.

William Hackett has taken its extensive knowledge of corrosion protection acquired in the supply of specialist topside and subsea hoisting range to the offshore sector and translated this technology to a second generation range of William Hackett CP-C4 anti corrosion chain hoists. These hoists can be supplied in the following configurations;

- Single hook suspension unit

- Low headroom combined chain hoist and push travel trolley

- Low headroom combined chain hoist and geared travel trolley

All the above hoist configurations can also be supplied with the following options:

- Calibrated Grade T (8) load chain to IS EN818-7 zinc plated with zinc plated hand chain.

- Calibrated Grade T (8) load chain to IS EN818-7 DT9 corrosion coated and hand chain Dacromet corrosion coated.

- Calibrated Grade S (6) 316L stainless steel load chain, hand chain and bottom hook (stainless steel bottom hooks are only available for 500kg and 1 tonne units)

- Overload protection option available.

Features:

- 500hrs + Protection against salt spray tests according to ASTM B117.

- Twin pawls as standard.

- Heavy duty forged safety catches.

- Stainless steel fixings used throughout the hoist.

- Hook housing is bolt connected using cap head screws and nyloc nuts.

- All hoist components are corrosion protected.

- Load chain meets the requirements of European standards: IS EN818-7.

- Compact and robust design for easy handling.

Performance and Testing:

The William Hackett CP-C4 chain hoist has been fully tried and tested to include:

- Minimum Breaking Load - a minimum of 4 x the WLL.

- The load chain anchor / end stop tested to at least 2.5 x the WLL with no restriction of either the brake or gears.

- All Hoists are 100% proof tested at 1.5 x the Working Load Limit.

- Light load of 2% of Working Load Limit.

image
Part Code WLL
tonnes
No.
of
Falls
Load
Chains
mm
Standard
Lift
mm
A
mm
B
mm
E
mm
F
mm
G
mm
H
mm
Mass kg
3m HOL
Extra
Weight
per m
kg
022.053.CP0.5015.0 x 15312513027.534.641.72807.81.44
022.103.CP1.0016.0 x 18313415531.542.549.430611.11.71
022.203.CP2.0018.0 x 24315718536.544.555.044516.82.24

Swipe horizontally on Specs Table to view all information.