Yoke Grade 8 Shortening Clutch IS EN1677-1+2
- All Grade 8 lifting components sold by Chains Limited comply fully with the relevant section of IS EN1677.
- They are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load.
- The full compliance of these components means that they can be used in chain slings certified to IS EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
Specification
| Part Code |
Chain Size mm |
A mm |
C mm |
D mm |
E mm |
F mm |
G mm |
H mm |
K mm |
WLL tonnes |
Box Quantity |
Mass kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8-078-07 | 7, 8 | 12 | 20 | 10 | 23 | 70 | 9 | 22 | 128 | 2.00 | 30 | 0.70 |
| 8-078-10 | 10 | 13 | 26 | 12 | 29 | 87 | 11 | 26 | 154 | 3.15 | 15 | 1.30 |
| 8-078-13 | 13 | 15 | 33 | 16 | 37 | 115 | 15 | 36 | 203 | 5.30 | 8 | 2.80 |
| 8-078-16 | 16 | 21 | 39 | 19 | 46 | 143 | 19 | 39 | 248 | 8.00 | 4 | 5.20 |
Swipe horizontally on Specs Table to view all information.