Yoke Grade 8 Component Connector IS EN1677-1+2
- All Grade 8 lifting components sold by Chains Limited comply fully with the relevant section of IS EN1677.
- They are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load.
- The full compliance of these components means that they can be used in chain slings certified to IS EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
Specification
| Part Code |
Chain Size mm |
A mm |
B mm |
D mm |
K mm |
WLL tonnes |
Box Quantity |
Mass kg |
|---|---|---|---|---|---|---|---|---|
| 8-015-07 | 7, 8 | 18 | 22 | 9 | 57 | 2.00 | 150 | 0.20 |
| 8-015-10 | 10 | 25 | 26 | 11 | 68 | 3.15 | 50 | 0.30 |
| 8-015-13 | 13 | 30 | 35 | 16 | 91 | 5.30 | 35 | 0.70 |
| 8-015-16 | 16 | 36 | 38 | 19 | 100 | 8.00 | 20 | 1.10 |
| 8-015-20 | 18, 20 | 42 | 46 | 22 | 122 | 12.50 | 10 | 1.90 |
| 8-015-22 | 22 | 49 | 59 | 24 | 152 | 15.00 | 6 | 3.00 |
| 8-015-26 | 26 | 55 | 62 | 30 | 162 | 21.20 | 3 | 5.00 |
| 8-015-32 | 32 | 69 | 79 | 36 | 202 | 31.50 | 2 | 9.00 |
Swipe horizontally on Specs Table to view all information.