Yoke Grade 10 Clevis Foundry Hook
- All Grade 10 lifting components sold by Chains Limited comply fully with the relevant section of IS EN1677, ASTM A952/A and DIN PAS 1061.
- The grade 10 components are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load.
- The full compliance of these components means that they can be used in chain slings certified to IS EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
Specification
| Product Code | Chain Size mm |
A mm |
H mm |
K mm |
P mm |
T mm |
W.L.L. (t) |
Box Quantity |
Mass (kg) |
|---|---|---|---|---|---|---|---|---|---|
| X-046-07 | 7,8 | 9 | 27 | 133 | 62 | 19 | 2.5 | 25 | 0.95 |
| X-046-10 | 10 | 11 | 32 | 163 | 74 | 23 | 4.0 | 12 | 1.8 |
| X-046-13 | 13 | 14 | 39 | 200 | 88 | 32 | 6.7 | 8 | 3.6 |
| X-046-16 | 16 | 18 | 47 | 239 | 98 | 41 | 10.0 | 5 | 6.4 |
| X-046-20 | 20 | 21 | 62 | 305 | 113 | 46 | 16.0 | 2 | 11.2 |
Swipe horizontally on Specs Table to view all information.