Yoke Grade 10 Component Connector IS EN1677-1+2
- All Grade 10 lifting components sold by Chains Limited comply fully with the relevant section of IS EN1677, ASTM A952/A and DIN PAS 1061.
- The grade 10 components are forged from alloy steel, they are crack detected following heat treatment and finally proof tested to 2.5 times working load.
- The full compliance of these components means that they can be used in chain slings certified to IS EN 818-4, for use in a temperature range of -40°C up to 200°C without reduction in working load limit.
Specification
| Product Code | Chain Size mm |
A mm |
B mm |
D mm |
K mm |
W.L.L. (t) |
Box Quantity |
Mass (kg) |
|---|---|---|---|---|---|---|---|---|
| X-015-06 | 6 | 15 | 18 | 7 | 45 | 1.4 | 200 | 0.08 |
| X-015-07 | 7/8 | 18 | 25 | 9 | 59 | 2.5 | 150 | 0.2 |
| X-015-10 | 10 | 25 | 28 | 11 | 69 | 4.0 | 50 | 0.3 |
| X-015-13 | 13 | 30 | 38 | 16 | 92 | 6.7 | 35 | 0.7 |
| X-015-16 | 16 | 36 | 41 | 19 | 101 | 10.0 | 20 | 1.2 |
| X-015-20 | 20 | 42 | 50 | 23 | 122 | 16.0 | 10 | 2.1 |
| X-015-22 | 22 | 49 | 63 | 24 | 152 | 19.0 | 6 | 3.5 |
| X-015-26 | 26 | 55 | 66 | 30 | 162 | 26.5 | 3 | 4.8 |
| X-015-32 | 32 | 69 | 79 | 36 | 203 | 40.0 | 2 | 9.0 |
Swipe horizontally on Specs Table to view all information.